- sufficient quantities of fuel oil and e.g. AdBlue for supplying machinery, all in one package
- nominal volume 400 l, fill volume approx. 380 l, for diesel and fuel oil
- space with a separate lid on the back of the container for 2x20L or 3x10L canisters, tools or straps
- fueling can be done conveniently from the back of a van or a pickup truck
- Piusi 12/24 V dual voltage pump, cables 2 m, output 30/50 l/min
- 4 m fuel hose and manual fuel nozzle
- rubber lid locks as standard, padlock ready
- handling with a forklift from below or by the handles with straps
- length 960 ± 25 mm
- width 1180 ± 25 mm
- height 680 ± 25 mm
- weight with accessories 55 ± 2 kg
- IBC approved packaging
- ADR certificate not required from the driver
- UN/ADR type approved IBC packaging, packing type 31H2, packing group 3
- breathing valve to compensate volume changes by temperature
- filling connection DN100
- slosh plate integrated in the structure
- suction hose with 3/4" ball valve before pump, foot valve and filter
- material polyethene
Equipment:
- Piusi 12/24 V dual voltage pump, cables 2 m, output 30/50 l/min
- 4 m fuel hose and manual aluminium fuel nozzle
- suction hose with 3/4" ball valve before pump, foot valve and filter
Finncont® expert opinion on the use of the TDG exemption section 1.1.3.1 C:
- Finncont® fuel tanks are UN/ADR type-approved and tested IBCs. The Finncont® fuel tank is suitable for authorized transport of diesel and fuel oil in all conditions. A UN/ADR type-approved IBC packaging must be used when transporting fuel in connection with the fuel supply of machinery / equipment that perform contracting / billable work. In this case, the inspection and service life obligations apply. If you feel that you are covered by the exemption in section 1.1.3.1.C, eg. private use or do not perform billable work, there is no 2 1/2 year inspection obligation and the 7.5 year service life does not apply. An unapproved tank has the same status in new condition as Finnconts tank at the end of its 7.5-year service life. It is not possible to certify an unapproved tank for use in contracting / billing jobs.
