ENGINE FLUSH 250ML

- Engine Flush - motors oil sump service and cleaning additive - cleans oil reservoir before oil change - removes blocks and sludge caused by old lubricant, giving new lubricant maximal operational affect - suitable for all diesel and gasoline engines - 250 ml Benefits: - cleans oil reservoir for sludge and old oil contaminants - cleans hydraulic valve push-rods - cleans crankcase - extracts piston rings - removes moisture from oil sump - contains lubrication additivies - cleans oil pump and ensures maximal lubrication - ensures maximal lubrication level for turbo charger Instructions (Yearly service or every 30.000 km): 1 Add 250 ml (1 bottle) engine flush to oil sump, check oil level and then start motor. If oil sump capacity is more than 4,5 litres, use 500 ml of engine flush 2 Let motor run in idle, until normal running temperature has been achieved. 3 let motor run in idle still 10-20minutes, depending on motor size. If oil sump is 4,5litres or bigger let motor run full 20minutes. 4 stop engine and change oil and filter NOTE!! After adding engine flush to oil sump, do not use motor on high rpm´s. Only idle run allowed. Driving forbidden during use of engine flush.